Table is now locked and I cannot edit it

[Charon9]

Did a LOT of little changes to an ARAP bin.
Fans, ignore EGR, spark tables, fuel calc's etc.

One of the changes I made was to bring the idle up just a little, because of the injector size that is not working well. Went back to tinker with the idle tables some and it won't edit the tables. I change the IDLE vs COOLANT TEMP: 650.00 to (anything below) and tell it save, it won't save.
Got to looking at the info on the bottom of the window for the table and I now see

SEL COUNT: 1 MIN 650.00 MAX 650.00 AVG 650.00

and nothing I can do will change that?

I re-opened the original BIN; was just going to go through and do a compare and such, but new bin will default to 650.00 no matter what number I put in there.
Is there a cache that is bugging me? etc..?
(PM me an email addy if you need, and I will forward the bin (No its not write protected, already checked))

[Charon9]

update(?)

I changed the table to HEX and stepped down and it started saving then.

IE:
problem entry: Idle 575.00 (dec) - won't save
Hex entry: Idle 2Eh saved (back to dec) 575.00


querk - work around ?
Something with translation of the table?

[vxl67getrag]

It sounds like that's a scalar not a table, but issue can happen with either if the min/max values in the xdf are set.

So change the xdf & save it, then try edit the bin with it!