95 Z28 LT1 A4 Camaro

Chaos1187 · Post by **Chaos1187** » Wed Jan 19, 2011 6:37 pm

I need to make the PCM on the car default back to stock. I need to upload a stocki.bin file?? Or what do I need to do I am at a total loss here. The car functions at wrong cells during idle, deceleration, etc. Someone else solved this by loading a stock tune...

I downloaded tunerpro rt with the two file for my car that go with the program (EE.xdf and the other file for the aldl i believe). I havent plugged up to the car yet as I dont know what to do next.

Help please..

EagleMark · Post by **EagleMark** » Thu Jan 20, 2011 5:07 am

TunerPro can not upload (flash) the LT1 ECM. It can read, datalog and even make changes to the .bin file but not capable of flashing your ECM.

Chaos1187 · Post by **Chaos1187** » Thu Jan 20, 2011 5:38 am

Where is a good place to send off the PCM to get what I need done to it?? What price range am I looking at?

EagleMark · Post by **EagleMark** » Thu Jan 20, 2011 5:45 am

Not sure but Moates has always led me in the right direction.

http://www.moates.net/

Post by **Mangus** » Thu Jan 20, 2011 1:52 pm

If you like TunerPro, use TunerPro to tune, and use WinFlash (which $20 from TunerCat) to do the read/write from/to the PCM.

EagleMark · Post by **EagleMark** » Thu Jan 20, 2011 2:17 pm

Cool! I just read the tunercat website and it said you need to hook up serial port to ALDL port. Is there a USB option?

Is the tunercat winflash differant then the free ones I found doing a google search?

Post by **Mangus** » Thu Jan 20, 2011 2:18 pm

What free ones? (Links please)

Any ALDL cable should work, USB or serial (USB cables work through serial enumation).

EagleMark · Post by **EagleMark** » Thu Jan 20, 2011 2:20 pm

Post by **Mangus** » Thu Jan 20, 2011 2:22 pm

What am I looking for here? Those hits are computer (PC) BIOS flash utilities, and have nothing to do with vehicles. Unless I'm missing something.

EagleMark · Post by **EagleMark** » Thu Jan 20, 2011 2:26 pm

No I just searched for winflash and found those but no links to tunercat, so I went to tunercat website to find it...

whitebread · Post by **whitebread** » Thu Jan 20, 2011 4:01 pm

Sorry dont mean to thread jack. but can someone point me in the right direction to start using tunerpro on my 99' ss ls1. I run ostrich 2.0 and jackal (soon to be using tunerpro) on my built 1g dsm. Thanks guys