Can't save.. wtf?

McHaals · Post by **McHaals** » Tue Apr 28, 2009 11:34 am

hi all..

just downloaded 4.14.0381.... RT

made a new XDF..
load a bin..
made a new constant..

when if i modify it and push on SAVE.. doesnt save..
opened , and the value is the old...

tried everithing.. on XP, vista, windows7... admin rights...etc..

any idea???

Post by **dex** » Tue Apr 28, 2009 12:36 pm

This may be obvious, is the original bin file property attributes set to 'read only'?

McHaals · Post by **McHaals** » Wed Apr 29, 2009 3:58 am

not read only..( checked )
(and i readed out from an EPROM)
tried others, its the same..

3.1 worx..

Post by **dex** » Wed Apr 29, 2009 4:00 am

If you don't mind, post the bin and xdf so that it can be looked at.

McHaals · Post by **McHaals** » Wed Apr 29, 2009 4:20 am

http://rapidshare.com/files/227116149/A ... 4.zip.html

Six_Shooter · Post by **Six_Shooter** » Wed Apr 29, 2009 8:01 am

Are you trying to save the modified xdf or the modified bin?

It sounds like you might be using the wrong save button or option.

There's seperate save buttons for the xdf, bin and ads, also adl.

McHaals · Post by **McHaals** » Wed Apr 29, 2009 8:36 am

sry 4 my bad english..

McHaals · Post by **McHaals** » Wed Apr 29, 2009 8:41 am

Six_Shooter wrote:Are you trying to save the modified xdf or the modified bin?

It sounds like you might be using the wrong save button or option.

There's seperate save buttons for the xdf, bin and ads, also adl.

i know the difference between save *.bin and save *.xdf...
but thx..

McHaals · Post by **McHaals** » Wed Apr 29, 2009 11:56 am

another problem:
its a 16x16 8 bit table..
what do i wrong?

Post by **dex** » Thu Apr 30, 2009 3:31 am

The solution to both your problems is to set the bin size in the xdf header. Press Ctrl + F2 to open the xdf header editor.

McHaals · Post by **McHaals** » Thu Apr 30, 2009 4:13 am

WORKS... THANX alot....

moon_walk · Post by **moon_walk** » Tue May 25, 2010 12:25 am

for me .. i have still same issue .. not saving maps at all .. even though bin size is correct

using 80000h bin with 60000h offset .. and won't save